Lights

1. Select Config > Lights from the menu.

A list of all the lights in your facility displays.

1. Select Config > Lights from the menu.
2. Select the Serial Number for the light you wish to view.

Detailed information for the selected light displays.

1. Select Config > Lights from the menu.
2. Within the row of the light you wish to modify, click Edit.
3. Edit light settings as needed:
   • Name
   • Select / deselect Disable Control: The Disable Control feature increases network speed when a light in the map is known to be missing, powered off, or experiencing connectivity issues. Only check this option for lights meeting these conditions.
   • Select / deselect Daylight Harvesting Enabled
   • Select / deselect Coordination Master
   • Select a new Zone
   • Enter a new Description
4. Click Update Light.
5. Perform a Sync.

Note: You can move a light between zones with the same Network ID. If the desired destination zone has a different Network ID, you must use Commissioner Software to make the change.

LightRules software features expanded data access on a per-light basis. The raw data file includes the following:

• Total time since the light was last reset.
• Total time the light has been in active mode.
• Total energy usage.

1. Select Config > Lights from the menu.
2. Select the Serial Number for the light you wish to view.
3. Click Raw Usage.
4. Enter a date range and then click download.
5. Open the CSV file using a simple text editor or spreadsheet software.