FAQs > PERFORMANCE > How do I schedule lights to "all on?"
How Do I Schedule Lights to "All On?"
On a recurring basis, it may be necessary to set all lights to active power level 100 / inactive power level 100 (fully on, no dimming). For example, to accommodate weekly inspection on Friday mornings from 9 am to 11 am, you can schedule a recurring block:
- Create a new profile (for help, see Profiles).
- Name the profile "Inspection" or similar.
- Specify active and inactive power levels of 100 across all zones in the facility.
- Save the profile and open the calendar (for help, see Calendar).
- Click and drag to create a block on the calendar, select the "Inspection" profile you just created, and then specify the following settings:
- Start time: 9:00am
- End time: 11:00am
- Repeat option: Every Friday
- (Optional) Enter an end date.
- Save the block.
How do I temporarily turn lights "All On?"
For an unscheduled event, you can temporarily set all lights to active power level 100 and inactive power 100 (all lights fully on, without any dimming):
- Clone the default profile.
- Create a logical name like: "Entire Facility, all lights ON 100," or similar.
- Across all zones, specify active and inactive power levels of 100, and then run the manual profile.
- Cancel the manual profile when the event is over.
Tip: Create and save an "all lights ON 100" manual profile for future use.
